Now the most difficult. Fenders. At first according to the drawing I bent a wire. I used a wire from a set. For bends I used various round objects. Behind that I have soldered the ends with silver solder for rigidity. In general I soldered everything silver solder with gumboil.
After has made forward fenders on the same technology I have made back and a footboard.
Further I have departed from the instruction and have decided to solder all this together. Only for bigger rigidity and convenience of fastening.
By means of the hair dryer and water I have given to cardboard fenders from a set the necessary form. But before it on a template in the instruction I have bent a metal basis of fenders.