Antique Cars in Miniatures

There now, everything approaches end and it is the project too. For production of a dash I have bent a wire according to the drawing. Behind that according to the drawing I have made rigidity and I have soldered all this solder.


For pasting with outside I used paper. I have missed the mark with glue from within and I have pressed a vice through a soft packing material. It has as a result turned out dash. Having drilled openings I have pasted 3 pins. After that I have painted everything darkly blue color.

We continue. I have made a rug with openings under pedals of a black cardboard.
Pedals of ink, the stopper has also made and blackened him too.

Then I have installed all this on the car.


Behind that I have pasted a seat. On a seat I have fixed the transfer switching lever.


I begin to do headlights further. At first I drill in depth for creation of visibility of a reflector of light.

Behind that I produce a headlight according to the instruction.


After that I paint a reflector in chrome, and with outside under brass.

I cut out glass from plastic and I paste on a headlight. And at the end I install headlights on the car.

We go further. I have soldered all fastenings to fenders. I began with forward part, having assigned them to that in the place I have marked back fastening. In the last turn of solder fastening of a footboard. After that I have painted everything.


I have painted fenders darkly blue color.

And finally having fixed a framework of fenders on the case I have pasted to them fenders.





I have made a footboard of wooden laths and I have pasted into place.