Author Archives: Shura

Part #13

      Comments Off on Part #13

He continued to manufacture the intermediate axle. I glued the rods. The finished unit was painted with a primer and paint. I glued this knot to the frame. I made a drive from a chain of armor weaving.

Part #12

      Comments Off on Part #12

Blackened the gears and secured to the rear axle. I made an intermediate axle by carving the mounting lugs out of wood. Having installed the cardan, I tried on the entire assembly on the frame.

Part #11

      Comments Off on Part #11

Made gear wheels. Marked on a brass plate, drilled around the circumference, separated the wheels from the plate and brought the teeth with a file to the desired size.