Part 11

      No Comments on Part 11

Production of a wheel of management. For production of a wheel I used the telescopic antenna from the radio receiver. A core as a wheel and tubes for production of holders of a wheel. I have made the top part of a wheel on hinged connection.
20160420_090129
20160420_093048
The top holder I has inserted in has spent on drink a piece of a tube and has bent inside.
20160420_094508
20160420_120113
I have turned the handle from a tree and I have inserted into the drilled wheel opening.
20160420_145813
20160420_151828
The lower holder has made of a strip of brass which he has bent and has soldered to a tube. After that I cut off the necessary length of a tube and ink. In the lower part of a wheel I have soldered the lever of draft and too I blackened.
20160420_160707
Wheel assembled.
20160421_100640
Well and actually installation of a wheel. At first on glue the top holder, has assigned to that lower. I have fixed everything by carnations.
20160421_110124
Behind that I have made draft of a brass bar and I have fixed it on a forward axis. After that I have pasted a forward axis to springs and I have fixed the second part of the lever with the wheel lever. Generally the wheel is ready.
20160421_162808
20160421_162815
20160421_162840

 

Part 10

      No Comments on Part 10

Now I do a back axis. I have ground a reducer detail, too have corrected brake disks.
20160419_101232
In a reducer I have drilled holes for imitation of an exit of a chain. Behind that having measured length, I cut off a string-chain and I have pasted in a reducer.
20160419_121611
I have pasted brake disks, but the reducer left not pasted.
20160419_154121
After that I glued details in the following sequence – at first an axis to springs, then after fitting a reducer and the last the electric motor.
20160420_084857

Part 9

      No Comments on Part 9

I pass to production of a forward axis. Except the axis from a set the brass tube, a leaf and a wire will be necessary for me. Process of production is visible in photos. After production I do everything black.
20160414_144636
20160414_145429
20160414_152139
20160414_155618
20160414_164845
20160414_165004
20160415_122045
20160418_162559
Well and fitting of everything that I have made at the moment. And on model too.
20160419_092655
20160419_093217