Part #7

      No Comments on Part #7

Continued to do springs. On front springs headlights are fixed. Their production I was also engaged. As made it is visible on a photo. After that covered all running gear with a joint filler. Made steering pull-rods of a brass wire. Practically everything is ready to painting.

Part #6

      No Comments on Part #6

After I have made axes I have connected them to the help of longitudinal beams and have covered with primer. Has strengthened beams to axes carnations.
20161201_143552
20161201_143615
Now has started springs. Cut out strips from brass, has bent by the size and has soldered. It will be a spring basis.
20161205_094541
20161207_092725
From above has pasted cardboard strips for imitation of springs.
20161207_135115
Further has made the top fastening of springs of brass and has pasted them. Also has strengthened this connection by brass carnations which has fixed on the basis of a spring by the soldering. For the lower part has made fastenings for axes of a tree.
20161207_135115
20161208_164934
20161208_165009
On it so far all.